Home › Showroom › Manufacturer Models › Details
2021 Ski-Doo Freeride 165 850 E-TEC SHOT PowderMax Light FlexEdge 3.0 •
$16,349
MAKE YOUR STATEMENT.
The Freeride is the deep-snow snowmobile built for riders who go big and don't look back. Built with a big attitude for big drops and taking on the most intense terrain a rider dares to explore, there's no bigger statement this winter. (Spring Only Model)
- Features
- Specs
- Options
- Photos
- Promotions
Features
- SHORT TUNNEL - DROP THE DRAG: Go more places with a shorter tunnel length allowing optimal maneuverability in deep snow thanks to exceptional snow evacuation. Standard rear lightweight snowflap with LinQ-ready attachment points to attach optional removeable long snowflap.
- ONE-PIECE LIGHTWEIGHT HOOD - LIGHT AND AIRY: One-piece Polypropylene construction instantly drops 6.2 lbs. of weight. Optimized ventilation for heat dispesion and noise reduction.
- ERGONOMIC - DEEP-SNOW DESIGN: Purpose-built for a better deep-snow experience with lower seat height, smaller diameter handlebars and low handlebar strap for the ultimate advantage in deep snow.
- DYNAMIC HANDLING - A MORE CONFIDENT RIDE: Revised ski spindle and ski stopper for more predictable handling and a confidence-inspiring ride on steep sidehills and rough terrain.
- E-TEC SHOT STARTER - EASIEST STARTING: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology.
- KYB PRO SHOCKS - PRO-LEVEL SHOCKS: These shocks are standard on the MXZx 600RS race sled - so you know they're extremely capable and durable for control in the toughest conditions. Remote reservoir design for performance and they are a rebuildable/revalvable. Easy Adjust compression damping knob does not require tools; rebound adjustments are standard as well.
- FULL-LENGTH PROFILE RUNNING BOARDS - SURE FOOTING: Rigid full-length extruded aluminum grid-style design with wide openings for exceptional snow evacuation and superior grip. Flat foot positioning for comfort and control, plus a 1 lb. weight reduction. (X packages only)
- TMOTION REAR SUSPENSION - CARVES WITH YOU: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.
- ROTAX 850 E-TEC ENGINE - MORE POWER YOU CAN FEEL: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines.
General Information
Model
Freeride 165 850 E-TEC SHOT PowderMax Light FlexEdge 3.0
Dimensions
Length
Overall - 129.9 in. (3,299 mm)
Height
Overall - 54.9 in. (1,395 mm)
Width
Overall - 42.5 to 43.7 in. (1,080 to 1,110 mm)
Weight
Dry - 453 lb. (206 kg)
Engine & Drivetrain
Engine
Rotax 850 E-TEC, two-stoke, eRAVE™
Horsepower
165 hp @7,900 rpm
Displacement
849 cc (51.9 cu. in.)
Bore x Stroke
3.2 x 3.2 in. (82 x 80.4 mm)
Fuel System
E-TEC® direct injection with additional booster injectors
Clutch
Engagement - 3,600 RPM
Drive Clutch
pDrive™ with clickers
Drive Sprocket
Number - 6
Diameter - 6.5 in. (164 mm)
Clutch Calibration
High Altitude
Brakes
Brembo racing brake with stainless-steel braided brake line
Fuel Type
Recommended - Premium unleaded
Minimum Octane - 91
Fuel Capacity
9.5 gal. (36 l)
Oil Capacity
3.6 qt. (3.4 l)
Operational
Platform/Frame
REV® Gen4
Bodywork - Narrow design
Handlebar
Tapered U-shaped aluminum with J-hooks / Low grab handle
Riser block height - 6.5 in. (165 mm)
Instrumentation
4.5 in. digital display
Seating or Rider capacity
Deep snow compact and lightweight
Ski Stance
35.8 or 37.4 in. (910 or 950 mm)
Carbide
Runner - Square 3/8
Carbide configuration - 4 in. (102 mm) at 90°
Track Type
PowderMax Light with FlexEdge™
Track LxWxH
165 x 16 x 3.0 in. (4,178 x 406 x 76 mm)
Other
Includes
Heated throttle lever / grips
Suspension
Shocks
Front - KYB PRO 36 R Easy-Adjust
Center - KYB PRO 40 Easy-Adjust
Rear - KYB PRO 40 Easy-Adjust
Front Suspension
RAS™ 3
Max. Travel - 8.5 in. (215 mm)
Rear Suspension
tMotion™
Max. Travel - 9.4 in. (239 mm)